Hi All, I need to repower my 2004 Albin. Can anyone please advise how the engines are best removed? They won't fit through the door and other than cutting out a portion of the rear cabin, I don't know what to do. Any feedback would be greatly appreciated.
Thank you!
• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Repower 35 Albin TE
-
capedreams
- Swabby
- Posts: 1
- Joined: Wed Jun 04, 2025 1:48 pm
- Home Port: Harwich MA
-
Jkraft
- Gold Member
- Posts: 543
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Repower 35 Albin TE
While I’m not familiar with the engine removal on a 35, I have been around enough boats with limited access. If the port or starboard window frame was removed and the engine was stripped of its coolers and turbo, would the block fit through that opening? Cutting that aft bulkhead would be my last resort
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”