I am replacing the wet elbow this weekend and just noticed that the new metal gasket has a ridge on it. Anybody know if it goes towards the dry elbow or the wet elbow? Of course the old was was compressed and destroyed from removal. Might not even matter, but thought I would ask. Yanmar 6LP-STP
Thanks!
• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Exhaust Elbow (Wet)
Moderator: Jeremyvmd
-
Carl
- Gold Member
- Posts: 775
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Exhaust Elbow (Wet)
28TE "Kozy L"
"How U Albin"
"How U Albin"
-
Old School
- Gold Member
- Posts: 76
- Joined: Mon Jul 04, 2011 6:44 am
- Home Port: NY,NY
Re: Exhaust Elbow (Wet)
Mine was just flat but corrugated. Sounds like yours may have been previously installed. That's the way they look when the come out most times. Like a cross section "L"
-
Carl
- Gold Member
- Posts: 775
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Re: Exhaust Elbow (Wet)
No, I just got it in the mail from Yanmar, its still in the sealed plastic bag. I am assuming the ridge direction wont matter. Its more like a metal washer with a ridge.
I think I am going to put the ridge towards the dry elbow side, as it has a little surface rust. New elbow is stainless and shiny!
I think I am going to put the ridge towards the dry elbow side, as it has a little surface rust. New elbow is stainless and shiny!
28TE "Kozy L"
"How U Albin"
"How U Albin"