• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Replacing cutless bearing on A27
-
- Gold Member
- Posts: 21
- Joined: Fri Feb 25, 2011 10:28 am
- Home Port: 100 Mile House, BC
Replacing cutless bearing on A27
Hi there, Has anyone replaced their cutlass bearing on A27? If so can you advise where you purchased the bearing and also any tips on the replacement process? Thanks, Roger
-
- Gold Member
- Posts: 17
- Joined: Tue Aug 24, 2010 7:54 pm
- Home Port: Little River, SC
- Location: Smithfield, NC
Re: Replacing cutlass bearing on A27
I purchased a nylon type piece of stock and had my local machine shop turn it to my specifications.
I may have some of the stock left and/or the supplier I purchased it from.
Jim Lewis
"Six Grand"
Albin 27' SC
Calabash, NC
I may have some of the stock left and/or the supplier I purchased it from.
Jim Lewis
"Six Grand"
Albin 27' SC
Calabash, NC
-
- First Mate
- Posts: 33
- Joined: Sat Aug 03, 2013 10:16 pm
- Home Port: Cayo Hueso
- Location: Key West
Re: Replacing cutlass bearing on A27
I replaced mine this summer. I'll try to remember to bring my maintenance binder home this weekend and see if I have a record of where the bearing came from.
-
- Gold Member
- Posts: 3
- Joined: Tue Aug 24, 2021 10:29 am
- Home Port: Tri-City Yacht Club, West Shore of Hudson River, Albany County , NY
Re: Replacing cutlass bearing on A27
Must the prop shaft be removed on A27 in order to replace the cutlass bearing?
- sail149
- Gold Member
- Posts: 344
- Joined: Sun Nov 08, 2009 5:30 pm
- Home Port: Stuck at home on trailer! Chesapeake bay intended....
- Location: Eastern PA
Re: Replacing cutlass bearing on A27
Can’t imagine doing it with out removing as you will need to push it out from the inside where there is no room to do anything!
Possibly clamp a pair of clam shells to the shaft inside and then use the flange on the shaft to press then on the bearing and use it as a sort of slide hammer , or just remove shaft (!) and cut the bearings from inside and peel it out .
Nightmare of Job either way.
I wonder how the OP made our???
A job I’m not looking forward to
Cheers Warren
Possibly clamp a pair of clam shells to the shaft inside and then use the flange on the shaft to press then on the bearing and use it as a sort of slide hammer , or just remove shaft (!) and cut the bearings from inside and peel it out .
Nightmare of Job either way.
I wonder how the OP made our???
A job I’m not looking forward to
Cheers Warren
Warren
'84. 27AC. Lehman 4D61
'84. 27AC. Lehman 4D61