• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Replacing timing belt in 28te flush deck
Moderator: Jeremyvmd
-
- Mate
- Posts: 17
- Joined: Wed Feb 01, 2023 7:34 am
- Home Port: Avondale RI
Replacing timing belt in 28te flush deck
Is it posable to replace the timing belt on an Albin 28TE without pulling the motor.
- Tree
- Gold Member
- Posts: 1615
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: Repacing timing belt in 28te flush deck
I would think its a whole lot easier to do on a FD than then engine box model
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
-
- Gold Member
- Posts: 772
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Re: Replacing timing belt in 28te flush deck
Yes it is, have had mine done 3 times. Have your valves adjusted while you’re at it. I remove the engine hatch for the mechanic, and put it back when job is completed.
28TE "Kozy L"
"How U Albin"
"How U Albin"
-
- Gold Member
- Posts: 110
- Joined: Sun May 21, 2006 10:15 pm
- Home Port: Mystic River Marina Mystic Ct. Slipped
- Location: Tolland Connecticut
Re: Replacing timing belt in 28te flush deck
I have done mine while in the water. I am going to do my third belt this spring. Carl's advise is correct and that is what I do. The only thing I adding this time is doing preventive water pump replacement. I am 2,000 hours so assuming it should be done.
I do my own work on the mottor. So if you are going to do it yourself I could go into a couple of sugestions that I learned the first time I did mine.
I do my own work on the mottor. So if you are going to do it yourself I could go into a couple of sugestions that I learned the first time I did mine.
Terry & Karen Ober
28 TE
Maye Marie
Mystic Ct.
28 TE
Maye Marie
Mystic Ct.