I replaced my VDO tach/hour meter and it runs off the alternator. VDO says (tach) if it runs off the alternator you must set it to the correct pulse. Does anyone know what the correct setting (pulse) should be set at?
I have a Peninsular engine.
Harry
• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
New VDO tach/hour meter setup.
Moderator: Jeremyvmd
-
hgl
- Swabby
- Posts: 2
- Joined: Fri Feb 17, 2017 11:50 am
- Home Port: N. Miami
-
hgl
- Swabby
- Posts: 2
- Joined: Fri Feb 17, 2017 11:50 am
- Home Port: N. Miami
Re: New VDO tach/hour meter setup.
To answer my own question I believe it is 36. I used a meter to check the RPMs and it seemed to work well.
-
Jeremyvmd
- Gold Member
- Posts: 1043
- Joined: Mon Aug 10, 2015 11:17 am
- Home Port: Waretown nj
Re: New VDO tach/hour meter setup.
Good to know i never figured mine out. I'll have to try it out! My plan was to trial and error it but I never got around to it!
1989 Viking 45C “Knot Crazy”
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff