Hi there,
Has anybody ever had to replace a stern tube on a Classic 36? I replaced the cutless bearing on my boat, but when the bearing holder was removed it sheared off the stainless steel tube. Now the bearing holder is only attached by 2 studs. Has anybody ever had this happen?
I would appreciate your advice.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Stern tube replacement
-
Sebby
- First Mate
- Posts: 21
- Joined: Sun Jun 28, 2020 6:41 am
- Home Port: Glasson Basin Marina
-
jashmen
- Gold Member
- Posts: 109
- Joined: Fri Sep 28, 2018 11:02 am
- Home Port: bayville, nj
Re: Stern tube replacement
Wish I could have helped. How did it go?
-
Sebby
- First Mate
- Posts: 21
- Joined: Sun Jun 28, 2020 6:41 am
- Home Port: Glasson Basin Marina
Re: Stern tube replacement
Hi, we got it fixed by machining a stainless steel threaded spigot. Seems to be fine now