• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Albin 36 express trawler

Post Reply
Neptune1
Swabby
Swabby
Posts: 3
Joined: Mon Jan 23, 2017 1:56 pm
Home Port: jacksonville fl

Albin 36 express trawler

Post by Neptune1 »

Hello all,
I am looking at 1999 Et and would like to know what the hull core material is. Does this model have any history of wet coring?Where would be the obvious places to look?
Also I am interested in the process of backing this boat into a slip.The bridge site lines are challenging at best.Is the lower helm better?
Any comments would be appreciated.
joreyn
Gold Member
Gold Member
Posts: 322
Joined: Mon Aug 18, 2008 4:56 pm
Home Port: Port Ludlow, WA
Location: Port Ludlow, WA

Re: Albin 36 express trawler

Post by joreyn »

I believe the core on the 99s is balsa. They went to Airex a year or two later.

I back mine into our slip with no real difficulty, although it was a bit unnerving the first few times until I had a good frame of reference based on the edge of the hardtop.
Blue Moon
1999 36 Express Trawler
Post Reply

Return to “36' Express Trawler, 40' North Sea Cutter, 26' Center Console”