• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Shaft Dia. 2001 Albin 28 with 300 yanmar
Moderator: Jeremyvmd
-
Malcolm
- Deckhand
- Posts: 8
- Joined: Fri Jul 04, 2014 10:55 pm
- Home Port: Mill Bay, B.C. Canada
Shaft Dia. 2001 Albin 28 with 300 yanmar
Just looking to confirm from a previous post I looked up, the shaft zinc on the 2001 Albin 28 with a Yanmar 300 is a C7? 1.5" dia? Thanks,
-
RobS
- Gold Member
- Posts: 4050
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Shaft Dia. 2001 Albin 28 with 300 yanmar
Yes. 1-1/2" shaft. C-7 collar zinc. Be sure to seat it with smacks of a hammer as you tighten it down and do not put it up against the cutlass bearing.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
Malcolm
- Deckhand
- Posts: 8
- Joined: Fri Jul 04, 2014 10:55 pm
- Home Port: Mill Bay, B.C. Canada
Re: Shaft Dia. 2001 Albin 28 with 300 yanmar
Thanks very much!