• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.

2001 Albin 28 thru hull

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
Warren
Deckhand
Deckhand
Posts: 7
Joined: Mon Sep 13, 2010 2:34 pm
Home Port: Glovertown NL Canada

2001 Albin 28 thru hull

Post by Warren »

Just recently struck my prop on a rock ..damaged three of the four blades...prop repaired and was putting it on and noticed one of the two bolts on the exterior of the stuffing box was sheared off,
Satrted engine and water comes out around the seal the exterior of the stuffing box makes with the hull ....cant seem to find any pictures of what is involved to extract this bolt ...just wondering how things are put together down there ??? any pictures would be appreciated ...thanks again
Warren
Top
User avatar
RobS
Gold Member
Gold Member
Posts: 4050
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:
Contact RobS

Re: 2001 Albin 28 thru hull

Post by RobS »

See this thread regarding the bolts at the cutlass bearing:
viewtopic.php?f=7&t=4442&p=26202&hilit=cutlass#p26202

And this thread regarding the water coming out around the cutlass bearing & shaft:
viewtopic.php?f=5&t=4387&p=25876&hilit=cutlass#p25876
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Top
Post Reply

Return to “Albin Maintenance”