Some of you have wanted the part number for replacing the nylon/plastic steering knuckle on the A-25. The replacement comes from Teleflex and is called an "Inboard Clamp Block," the part number is SA27578P.
The new knuckle looks very sturdy, as you can see in the attached picture, and is made of aluminum. The only modification needed for the original Teleflex steering cable is to fabricate a bushing to fit inside the clamp around the cable. The original cable is a smaller diameter than the new cables, so you need a bushing in order for the clamp to tighten on the original cable. A simple, short length of tubing with a lenghwise cut in it did the trick for my installation.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
A-25 Steering Knuckle & Ball Replacement Parts
-
DaveP
A-25 Steering Knuckle & Ball Replacement Parts
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
tlawnsby
- Swabby
- Posts: 3
- Joined: Wed Apr 02, 2008 2:24 pm
Re: A-25 Steering Knuckle & Ball Replacement Parts
Dave,
Thanks for your help. I replaced my broken clamp with one from Bergeron and it works great. I broke my clamp while tightening bolts - and the nylon clamp split on me. New one is much stronger. Now the boat will go where I point it!
Regards,
Tom L.
A25 # 1602
Thanks for your help. I replaced my broken clamp with one from Bergeron and it works great. I broke my clamp while tightening bolts - and the nylon clamp split on me. New one is much stronger. Now the boat will go where I point it!
Regards,
Tom L.
A25 # 1602